Cutlass Ciera Cruiser V6-3300 3.3L MFI VIN N (1993)
17. Heater hose from throttle body.
18. Rear spark plug wires.
19. Intake manifold bolts and intake manifold.
INSTALL
1. To complete installation, observe the following assembly tips and reverse the removal procedures.
^
Clean the cylinder block, heads and intake manifold sealing surface of ALL oil with a suitable solvent.
^
Clean the intake manifold bolts and bolt holes of adhesive compound.
^
Apply sealer GM P/N 12345336 or RTV equivalent to the ends of the manifold seals.
^
Apply thread lock compound GM P/N 12345493 to the intake manifold bolt threads before assembly.
^
Tighten the intake manifold bolts TWICE to 10 Nm (89 in lb).
^
Lubricate throttle body coolant and heater pipe O-ring seals with antifreeze before assembly.
