Cutlass Ciera Cruiser V6-3300 3.3L MFI VIN N (1993)
Fuel Pressure Test Port: Service and Repair
Area around fuel pressure connection with GM X-30A or equivalent.
REMOVE OR DISCONNECT:
1.
Negative battery terminal.
2.
Relieve fuel system pressure.
3.
Fuel pressure connection and seal. Discard seal.
INSTALL OR CONNECT:
1.
New seal on fuel pressure connection.
2.
Fuel pressure connection in fuel rail. Tighten Fuel pressure connection assembly to 10.0 N-m (88 lb. in.).
3.
Tighten fuel filler cap.
4.
Negative battery terminal.
5.
Turn ignition switch to the "ON" position for two seconds, then turn to the "OFF" position for ten seconds. Again turn to the "ON" position, and
check for fuel leaks.
6.
Perform the "Idle Learn Procedure." The ECM will need to relearn the IAC valve pintle position following battery reconnect.
Air Plenum And Fuel Rail Removal
