Cutlass Ciera Cruiser V6-3300 3.3L MFI VIN N (1993)
Throttle Cable/Linkage: Adjustments
The accelerator control system is cable type. There are no linkage adjustments. The specific cable for each application must be used. Only the specific
replacement part will work.
Check for correct opening and closing positions by operating the accelerator pedal. Make sure that the throttle valve reaches the wide open and fully
closed throttle positions. If it does not, inspect for damaged or bent brackets, levers, or other components, or for poor carpet fit under the accelerator
pedal.
If any binding is present in the linkage, check for:
1.
Proper routing of the throttle cable.
2.
Kinked or damaged cable.
3.
Free movement of:
a.
Throttle lever at the throttle body.
b.
Cable at throttle body or control lever/pulley.
c.
Accelerator lever at bearing support.
d.
Pedal at lever.
Whenever disconnecting or replacing parts, lubricate the pivot points with Accelerator Linkage Lubricant 1052541 or equivalent.
