Cutlass Ciera Cruiser V6-3300 3.3L MFI VIN N (1993)
Resistor Module (SIR): Service and Repair
The resistor module is part of the SIR wiring harness and is taped to the I/P wiring harness. The resistor module is located level with and to the right
of the radio.
1.
Disarm airbag system as described under ``Airbag System Disarming.''
2.
Remove radio.
3.
Carefully cut tape attaching resistor module to the I/P wiring harness.
4.
Release connector position assurance (CPA) and disconnect resistor module.
5.
Remove resistor module from vehicle.
6.
Reverse procedure to install. Rearm airbag system as described under ``Airbag System Arming.''