Cutlass Ciera Cruiser V6-3300 3.3L MFI VIN N (1993)
Impact Sensor: Service and Repair
Passenger Compartment Sensor
1.
Disarm airbag system as described under ``Airbag System Disarming.''
2.
Remove right sound insulator.
3.
Remove sensor electrical connector from retainer, then release connector position assurance (CPA) from connector and disconnect connector.
4.
Pull back carpet on tunnel for access to sensor.
5.
Loosen sensor mounting bolts and remove sensor.
6.
Reverse procedure to install, noting the following:
a. Tighten to specifications.
b. Rearm airbag system as described under ``Airbag System Arming.'
