Cutlass Ciera Cruiser V6-3300 3.3L MFI VIN N (1993)
6.
Remove white plastic adhesive protector from back of insulator and install five insulators on each wheel rim flange in a star pattern (at
approximately each wheel nut position). Refer to illustration.
Install insulator over wheel rim flange by opening slit in insulator and pressing insulator firmly in place over the wheel rim flange. The insulators
adhesive portion should point toward the center of the wheel.
Note:
Rubber washers contained in the insulator kit may be discarded.
7.
Install wheel cover.
Parts Information
Parts are currently available from GMSPO.
Warranty Information
For vehicles repaired under warranty, use:
Labor
Labor
Operation
Time
E0018
1.0 hour