Cutlass Ciera Cruiser V6-3300 3.3L MFI VIN N (1993)
1. Screws from inside remote handle escutcheon.
2. Door lock knob.
3. All wire connectors and bulb from escutcheon.
4. Escutcheon by sliding escutcheon forward to clear inside handle and inside locking rod and then sliding escutcheon rearward to disengage tabs on
front of escutcheon from trim panel.
INSTALL OR CONNECT
1. Wire connectors and bulb to escutcheon.
2. Escutcheon to trim panel by placing escutcheon over inside handle and inside locking rod and then sliding escutcheon forward to engage tabs on
escutcheon to trim panel.
3. Screws to inside remote handle escutcheon.
4. Lock knob.
Lock Knob
LOCK KNOB
Door Lock Remote Control Handle & Escutcheon
REMOVE OR DISCONNECT
1. Insert a small flat-bladed tool, such as a screwdriver, behind end of lock knob and pry to force it away from rod.
2. After end of rod is free from knob, slide knob rearward to remove from assembly.
INSTALL OR CONNECT
1. Position knob over locking rod and insert end of knob through hole in handle escutcheon.
2. Slide knob forward until end of rod goes into depression in end of knob.
3. Force knob against remote control escutcheon until rod snaps into knob.
Water Deflector
WATER DEFLECTOR
