Cutlass Ciera Cruiser V6-3300 3.3L MFI VIN N (1993)
Front Door Hardware - Disassembled View
TOOL REQUIRED:
^
J 34940 Heavy Duty Rivet Gun
REMOVE OR DISCONNECT
1. Door trim panel and water deflector.
2. Raise window to full-up position and tape window to door frame using cloth-backed body tape.
3. Lower sash bolts.
4. Punch out center pins of regulator rivets. Drill out rivets using 1/4 inch drill bit.
5. For manual regulator, remove regulator through rear access hole. For electric regulator, remove window as stated previously. Move regulator and
motor assembly rearward and remove electrical connector. Remove regulator and motor assembly through rear access hole.