Cutlass Cruiser V8-260 4.3L VIN 8 2-bbl (1982)
Wiper Switch: Service and Repair
Fig. 14 Windshield wiper switch removal & installation. Models w/standard steering column
Fig. 15 Windshield wiper switch removal & installation. Models w/tilt steering column
1.
Remove steering wheel as described under ``Horn Sounder and Steering Wheel, Replace.''
2.
Remove turn signal switch as described under ``Turn Signal Switch, Replace.''
3.
Remove ignition lock as described under ``Ignition Lock, Replace.''
4.
Remove and install cover and wiper switch as shown in Figs. 14 and 15.
5.
Reverse steps 1 through 3 to install.
