Cutlass Supreme V6-204 3.4L DOHC VIN X SFI (1995)
![background image](/oldsmobile/cutlass_supreme/v6-204_3.4l_dohc_vin_x_sfi/Page-635004.png)
Tool Required
-
J36660 Torque Angle Meter
Remove or Disconnect
1. Camshaft timing belt tensioner.
2. If the belt is to be used again, mark the direction of rotation.
3. Tensioner pulley/arm assembly.
4. Timing belt, by carefully sliding it off the pulleys. DO NOT bend, kink, twist, or pry on belt as damage may occur.
-
"Kinking" is folding belt so that the diameter at any point is less than 60 mm (2.36 inches).