Cutlass Supreme V6-3100 3.1L MFI VIN M (1994)
6. Press the piston pin from the piston and connecting rod assembly.
PISTON AND CONNECTING ROD ASSEMBLY
1. Install the J 24086-310 fork insert into the J 24086-10 fixture support assembly.
2. Adjust the J 24086-9 installation pin to the following setting: G-7.
CAUTION: Avoid contact with HOT components. Wear safety glasses and protective heat gloves to avoid personal injury!
NOTICE: Applying excessive heat to the connecting rod may damage or distort the connecting rod or piston. Connecting rod temperatures
should not exceed 320°C (612°F).
3. Using a connecting rod kiln heat the piston pin end of the connecting rod to 320°C (612°F).