oldsmobile Workshop Repair Guides

Oldsmobile Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2849 > < Idle Speed/Throttle Actuator - Electronic|Locations|Page 2844
Page 1
background image

Serial Data: Initial Inspection and Diagnostic Overview

PCM DATA LINE

1. If all components are not accessible with a scan tool, check for an open in CKT 800 between the Data Link Connector (DLC) terminal "M" and

S237.

2. If a single component is not accessible with a scan tool, check for an open in circuit CKT 800 between splice S237 and the component. If the

wire is OK, refer to:

Computers and Control Systems/Powertrain Control Module/Testing and Inspection; See: Engine Control Module

Brakes and Traction Control for Antilock Brake System (ABS) diagnosis; See: Brakes and Traction Control/Antilock Brakes / Traction Control
Systems

Air Bags and Seat Belts for Supplemental Inflatable Restraint (SIR) diagnosis; See: Restraint Systems/Air Bag Systems

Heating and Air Conditioning for HVAC Control Assembly diagnosis. See: Heating and Air Conditioning

ENTERTAINMENT AND COMFORT DATA LINE

1. If all components are not accessible with a scan tool, check for an open in circuit CKT 835 between DLC terminal "J" and splice S225.

2. If a single component is not accessible with a scan tool, check for an open circuit CKT 835 between splice S225 and the component.

Initial Inspection and Diagnostic Overview|Page 2849 > < Idle Speed/Throttle Actuator - Electronic|Locations|Page 2844