Cutlass Supreme V6-3100 3.1L MFI VIN M (1994)
Torque Converter Clutch Solenoid: Service and Repair
Transaxle Mount
TRANSAXLE MOUNT
Transaxle Mount
REMOVE OR DISCONNECT
1. Raise and suitably support vehicle.
2. Left front tire and wheel assembly.
3. Left front bumper fascia splash shield assembly.
4. Suitably support transaxle assembly with floor stands.
5. Transaxle mount transaxle side bracket to drive-train and front suspension frame assembly bolts/screws and nuts.
6. Transaxle mount transaxle side bracket assembly to transaxle mount assembly nuts.
7. Transaxle mount assembly.
INSTALL OR CONNECT
1. Transaxle mount assembly to transaxle mount side bracket assembly.
2. Nuts
TIGHTEN
^
Nuts to 53 Nm (39 lb. ft.).
3. Transaxle mount side bracket assembly to drive-train and front suspension frame assembly bolts/screws and nuts.
TIGHTEN
^
Bolts/screws and nuts to 58 Nm (49 lb. ft.).
4. Remove support from transaxle assembly.
5. Left front bumper fascia splash shield assembly.
6. Left front tire and wheel assembly.
7. Lower vehicle.