Cutlass Supreme V6-3100 3.1L MFI VIN M (1994)
Torque Converter Clutch Solenoid: Service and Repair
Transaxle Support Assembly (Bracket)
TRANSAXLE BRACKET
REMOVE OR DISCONNECT
1. Raise vehicle and suitably support.
2. Left front tire and wheel.
3. Left front bumper fascia splash shield.
4. Suitably support transaxle with floor stands.
5. Transaxle mount transaxle side bracket to transaxle mount nuts.
6. Bolts/screws.
7. Bracket.
INSTALL OR CONNECT
NOTICE:
^
Always use the correct fastener in the proper location. When you replace a fastener, use ONLY the exact part number for that application. The
manufacturer will call out those fasteners that require a replacement after removal. The manufacturer will also call out the fasteners that require
thread lockers or thread sealant. UNLESS OTHERWISE SPECIFIED, do not use supplemental coatings (paints, greases, or other corrosion
inhibitors) on threaded fasteners or fastener joint interfaces. Generally, such coatings adversely affect the fastener torque and the joint clamping