Cutlass Supreme V6-3100 3.1L MFI VIN M (1994)
COUPE
Disengaging Clip
Spring clips are used to secure handle connecting rods and inside locking rods to door lock levers in coupe. A slot in the clip provides for disengagement
of the rod.
Remove or Disconnect
1. Clip from lever by using a scratch awl, pick or other thin-bladed tool and sliding clip out of engagement.
2. Rod from clip by pulling rod out of clip.
Install or Connect
1. Clip to lever by pressing clip fully on lever.
2. Rod to lever by pressing rod through hole in lever until fully engaged by clip.
Stabilizer
Remove or Disconnect
1. Door trim panel on coupe or retractor trim cover on sedan.
2. Water deflector.
3. Stabilizer. Raise window to full up position and unsnap stabilizer from inner door panel.
Install or Connect
1. Stabilizer. Snap in place at inner door panel.
2. Water deflector.
3. Door trim panel or retractor trim cover, if removed.
Coupe