Cutlass Supreme V6-3100 3.1L MFI VIN M (1994)
1. Door trim panel.
2. Water deflector.
3. Down stop bumper by raising window to full-up position, grasping down stop bumper, twisting and lifting bumper from door.
Install or Connect
1. Down stop bumper by pressing and twisting the. bumper in place.
2. Water deflector.
3. Door trim panel.
Coupe
Door Lock Module
Remove or Disconnect
1. Door trim panel.
2. Water deflector.
3. Two rivets holding handle assembly, by first center punching a depression in the head of the rivet, then drilling out rivet using a 4.8 mm (3/16
inch) drill bit.
4. Rod from handle.
5. Inside handle by sliding rearward to disengage tabs on handle from slots in module assembly.
Install or Connect
1. Handle to module assembly by placing tabs on handle into slots in module and sliding handle forward.
2. Rod to handle.
3. Two rivets using 3/16 inch x 1/4 inch peel type rivets.
4. Water deflector.
5. Door trim panel.
Sedan