Cutlass Supreme V6-3100 3.1L MFI VIN M (1994)
Pull Handle Assembly (Sedan shown)
Remove or Disconnect
1. Handle bezel.
2. Switch plate assembly.
3. Screw from switch plate cutout and hanger plate.
4. Screw from lower armrest and hanger plate.
5. Screw from upper armrest and hanger plate.
Install or Connect
1. Screw to upper armrest and hanger plate.
Tighten
^
Screw to 3.25 N.m (29 lb. in.).
2. Screw to lower armrest and hanger plate.
Tighten
^
Screw to 1.9 N.m (17 lb. in.).
3. Screw to switch plate cutout and hanger plate.
Tighten
^
Screw to 1.9 N.m (17 lb. in.).
4. Switch plate assembly.
5. Handle bezel.
Spring Clips