oldsmobile Workshop Repair Guides

Oldsmobile Workshop Service and Repair Manuals

Fuel Tank/Underbody - Creak/Groan Noise Procedure|Page 3044 > < Fuel Tank/Underbody - Creak/Groan Noise Procedure|Page 3038
Page 1
background image

Fuel Tank Mounting Straps: Customer Interest
Fuel Tank/Underbody - Creak/Groan Noise Procedure

NUMBER:

91-T-84A

CORP.REF.NO: 136304

DATE:

October 1991

SECTION:

6C, 10

SUBJECT:

FUEL TANK/UNDERBODY CREAK/GROAN NOISE

- SERVICE PROCEDURE FOR INSTALLING FUEL 
TANK STRAPS AND SPACERS

MODELS/YEARS: 1989-91 CUTLASS SUPREME

This bulletin cancels and supersedes Dealer Technical Bulletin 91-T-84, which should be discarded.

CONDITION: Some 1989-91 Cutlass Supremes may exhibit a creak/groan, or in severe instances, a clunk/thud type noise coming from the rear of the

vehicle. This noise is most apparent when a vehicle twisting motion is generated, such as that which would be experienced when turning
up a steep incline/driveway.

CAUSE:

These noise conditions may be caused by the fuel tank flange contacting the underbody crossbar located forward of the fuel tank or
movement between the tank and retaining straps.

CORRECTION:

On 1989-91 Cutlass Supremes assembled prior to vehicle number MD332722, install new fuel tank straps. P/N 10199250 (2
required), and strap spacers, P/N 10192675 (2 required).

1991 Cutlass Supremes assembled after vehicle number MD332722, it will only require installation of tank straps, P/N 10199250 (2 required) and the
transfer of existing strap spacers.

Parts are currently available from GMSPO.

SERVICE PROCEDURE:

1.

Raise vehicle on hoist.

Fuel Tank/Underbody - Creak/Groan Noise Procedure|Page 3044 > < Fuel Tank/Underbody - Creak/Groan Noise Procedure|Page 3038