oldsmobile Workshop Repair Guides

Oldsmobile Workshop Service and Repair Manuals

Brakes and Traction Control > < Engine - Stalls on Drive/Reverse Engagement|Page 1716
Page 3
background image

FIGURE 3 - REMOVING SOLENOID

SERVICE ACTION: (Figure 3)

The new solenoid can be used to service all past THM 125C transaxle models. Remove the side cover and replace the solenoid and conduit assembly
(on-car service).
SERVICE PARTS INFORMATION:

8665016

Solenoid and Conduit Assembly - 1988 KDC Model Only

8652379

Solenoid and Conduit Assembly - All Other Models

Cars equipped with the 4.3L diesel engine should use the following parts:

8652377

Solenoid and Conduit Assembly - 1982-84 Models

8652376

Solenoid and Conduit Assembly - 1985 Models

SERVICE NOTES:

To properly diagnose the condition of the suspect Windsor built transaxles, assure that stabilized operating temperatures are obtained during normal road
evaluation phase of routine preliminary predelivery procedure.

Brakes and Traction Control > < Engine - Stalls on Drive/Reverse Engagement|Page 1716