Eighty-Eight V6-3.8L VIN K (1997)
Starter Solenoid: Service and Repair
SD-255 Starter Motor (Disassembled) Non Super Charged Engine
When a "no crank and no sound" starter condition exists, check the solenoid before disassembling the starter. The solenoid can be checked without
removal. Refer to "Cleaning, Inspection and Testing". See: Starter Motor/Service and Repair/Unit Repair (SD-255)
REMOVE OR DISCONNECT
1. Starter motor.
2. Screw at field strap.
3. Bolts from the solenoid.
4. Solenoid by rotating 90 degrees.
INSTALL OR CONNECT
1. Solenoid by rotating 90 degrees.
2. Bolts to the solenoid.
Tighten
^
Bolts to 6.5 N.m (60 lb. in.).
3. Screw at field strap.
Tighten
^
Screw to 8.5 N.m (75 lb. in.).
4. Starter motor.