Eighty-Eight Royale FWD V6-3.8L VIN K (1996)
^
Wipe off all dirt from the grease fitting before lubricating the joint. Ball joints should not be lubricated unless their temperature is 12°C (10° F) or
higher. During cold weather, the ball joint should be allowed to warm up as necessary before being lubricated. Use a low-pressure grease gun on all
joints to prevent seal damage.
^
Apply grease slowly while watching grease seal. Apply grease until grease is seen bleeding from the seal. If the seal expands but no grease is seen, do
not apply any more grease and allow time for the grease to bleed from the seal.