Eighty-Eight Royale FWD V6-3.8L VIN K (1996)
Audible Warning Device Control Module: Technical Service Bulletins
Lock/Alarm/Lighting/Chime - Replacement Procedures
File in Section: 8 - Chassis/Body Electrical
Bulletin No: 53-83-21
Date: October, 1995
SERVICE MANUAL UPDATE
Subject:
Section 8C - Procedures for Multi-Function Alarm, Lock and Lighting (MALL) Module, Perimeter Lighting Relay, Remote Function Actuator (RFA)
Module and Multi-Function Chime Control Module (w/Y67)
Models:
1996 Buick LeSabre, Park Avenue
1996 Oldsmobile Eighty Eight, Ninety Eight
1996 Pontiac Bonneville
Please insert the following procedures in Section 80 of the Service Manual.
Multi-Function Alarm, Lock And Lighting (Mall) Module
(Refer to Figure 1)
Remove or Disconnect
1.
Right lower I/P insulator, (2) screws, (1) light bulb.
2.
Electrical connector(s).
3.
MALL module from multi-use bracket. Press down on center tab of mounting bracket and slide module downward until mounting rails disengage.
Install or Connect
1.
MALL module to multi-use bracket.
^
Align mounting rails on module with mounting bracket rails.
^
Slide module forward into place until locking tab engages.