Eighty-Eight Royale FWD V6-3.8L VIN K (1996)
ACTUAL EGR POS should always be near the commanded EGR position (DESIRED EGR POS).
The PCM uses information from the following sensors to control the pintle position:
^
Engine Coolant Temperature (ECT) sensor.
^
Throttle Position (TP) sensor.
^
Mass Air Flow (MAF).
The linear EGR valve is usually activated under the following conditions:
^
Warm engine operation
^
Above idle speed
LEGEND IMAGE NUMBER 2
(1) Cap-Sensor
(2) Sensor-EGR Pintle Position
(3) Pole Piece-Primary
(4) Bobbin and Coil Assembly
(5) Sleeve-Armature
(6) Valve-Pintle
(7) Armature and Base Assembly
LEGEND IMAGE NUMBER 3
(1) Linear EGR Valve
(2) Exhaust Gas
(3) To Cylinders
(4) Pintle