Eighty-Eight Royale FWD V6-3.8L VIN K (1996)
1. Remove door trim panel. Refer to Section 10-6 of the Service Manual.
2. Remove speaker and water deflector. Refer to Section 10-6 of the Service Manual.
3. Remove upper and lower retaining bolts.
4. Remove window run channel.
5. Install new window run channel.
6. Install water deflector.
7. Install speaker.
8. Install door trim panel.
b. If one or both conditions exist:
1. Disengage entire portion of glass run channel.
2. Reinstall. Start at the applique and move toward the stationary glass. Push upper section in tight to door to engage top rubber lip. Push lower
flocked lip in to engage lower rubber lip.
3. Recheck retention as in Check Methods 1 and 2.
4. If reinstallation does not work, check garnish retainer underneath glass run channel to insure the proper retainer is installed. Inspect shape of
retainer and compare with Figure 3. If retainer is not correct, replace it.
