Intrigue V6-3.8L VIN K (1998)
Front Door Interior Handle: Service and Repair
Front Inside Door Handle
REMOVAL PROCEDURE
Door Handle Replacement: Front Inside - Removal Procedure
1. Raise the front door window to the full up position.
2. Remove the trim panel.
3. Remove the water deflector.
4. Disconnect the clips securing the rods to the handle.
5. Remove the rods from the inside door handle.
Door Handle Replacement: Front Inside - Removal Procedure
6. Remove the rivet mounting the inner door handle. Use a center punch to drive the door handle mounting rivet mandrel into the rivet head to create
a pilot hole.
Use a 6.35 mm (1/4 in) drill bit to drill out the rivet.
7. Remove the inside door handle.
INSTALLATION PROCEDURE
Door Handle Replacement: Front Inside - Installation Procedure
1. Install the front door inside door handle tabs in the front door.