Intrigue V6-3.8L VIN K (1998)
Trim Panel: Service and Repair
Assist Handle
REMOVAL PROCEDURE
Assist Handle Replacement: Removal Procedure
1. Pull down on the assist strap (3 or 4) to expose the screws.
2. Remove the assist strap screws.
3. Remove the side rail lamp (2), if equipped.
4. Remove the assist strap (3 or 4) from the vehicle.
INSTALLATION PROCEDURE
Assist Handle Replacement: Installation Procedure
1. Position the assist strap (3 or 4) in the vehicle.
2. Install the side rail lamp (2), if equipped.
3. Install the assist strap screws.
Tighten
Tighten the assist strap screws to 3 Nm (27 lb in).