Intrigue V6-3.8L VIN K (1998)
1. Install the hub and bearing assembly (2) to the vehicle. Refer to Front Wheel Drive Shaft Bearing Replacement in Front Suspension for installing
hub/bearing/speed sensor assembly.
2. Install the front wheel speed sensor electrical connector (2).
3. Install the wheel and tire assembly. Refer to Wheel Installation in Suspension.
4. Lower the vehicle.
5. Turn the ignition switch to the ON position with the engine off.
6. Perform the Diagnostic System Check. Refer to "ABS Diagnostic System Check" in Antilock Brake System.