Intrigue V6-3.8L VIN K (1998)
Brake Caliper: Service and Repair
Brake Caliper Bracket Replacement - Front
REMOVAL PROCEDURE
1. Remove the brake caliper (2). Refer to Brake Caliper Replacement - Front.
2. Remove the brake pads (5) from the brake caliper bracket (3).
3. Remove the brake pad retainers (4) from the brake caliper bracket.
4. Remove and DISCARD the brake caliper bracket bolts (2).
5. Remove the brake caliper bracket (1).
6. Remove the brake caliper bolt boots (3) from the brake caliper bracket (1).
7. Inspect and replace the brake caliper bracket if cracks or deformation damage exists.
8. Use a wire brush in order to clean away any rust and debris from the brake caliper bracket where the brake pad retainers contact the brake caliper
bracket.
9. Use a wire brush in order to clean away any rust and debris from the brake pads where the brake pads contact the brake pad retainers.
10. Clean away any rust and debris from the brake pad retainers.
INSTALLATION PROCEDURE