Intrigue V6-3.8L VIN K (1998)
Brake Rotor/Disc: Testing and Inspection
Brake Rotor Thickness Variation Check
Check thickness variation by measuring the rotor thickness at four or more points around the circumference of the rotor. Use a micrometer calibrated
in ten-thousandths of an inch. Make all measurements at the same distance in from the edge of the rotor.
IMPORTANT: When refinishing brake rotors the maximum thickness variation should be no greater than 0.013 mm (0.0005 in).
A rotor that varies in thickness by more than 0.025 mm (0.001 in) can cause pedal pulsation and/or front end vibration during brake applications. A
rotor that does not meet these specifications should be refinished to specifications or replaced.