Intrigue V6-3.8L VIN K (1998)
![background image](/oldsmobile/intrigue/v6-3.8l_vin_k/Page-739004.png)
13. Install the AC compressor bolts.
14. Connect the power steering cooler brackets to the frame.
15. Install the oil level sensor.
^
Tighten the oil level sensor to 20 Nm (15 ft. lbs.).
16. Connect the oil level sensor wiring harness connector.
17. Install the new oil filter.
18. Install the oil pan drain plug.
19. Install the torque converter cover.
20. Install the right engine splash shield.
21. Install the right (rear) exhaust manifold.
22. Install the PNP switch.