Intrigue V6-3.8L VIN K (1998)
6. Install the left (front) engine lift bracket to the left (front) exhaust manifold.
7. Install the left (front) engine lift bracket bolt and nut.
^
Tighten the left (front) engine lift bracket bolt and nut to 30 Nm (22 ft. lbs.).
8. Install the oil level indicator tube bracket.
9. Connect the left (front) spark plug wires.
10. Install the exhaust crossover to the left (front) exhaust manifold.
11. Install the engine mount struts.
12. Install the fuel injector sight shield. Refer to Engine Cover Replacement See: Engine/Service and Repair.
13. Connect the battery ground (negative) cable.