Intrigue V6-3.8L VIN K (1998)
Exhaust Pipe/Muffler Hanger: Service and Repair
Exhaust Muffler Hangers Replacement (Front)
REMOVAL PROCEDURE
1. Raise and suitably support the vehicle.
NOTICE: To prevent internal damage to the flexible coupling of the catalytic converter assembly, the converter must be supported. The vertical
movement at the rear of the catalytic converter assembly must not exceed 6 degrees up or down.
2. Suitably support the exhaust system.
3. Remove the exhaust pipe hanger bracket insulator.
4. Inspect the exhaust muffler front hanger bracket for serviceability. Repair or replace as necessary.
INSTALLATION PROCEDURE
1. Install the front exhaust pipe hanger bracket insulator.
2. Remove the support from the exhaust system.
3. Lower the vehicle.
4. Inspect the exhaust system for leaks and underbody contact.