Intrigue V6-3.8L VIN K (1998)
lever and the protruding wall of the HVAC module case below the valve lever in order to keep the valve lever in place.
4. Lift to release the defroster vacuum actuator retaining tab.
5. Carefully rotate the defroster vacuum actuator upward and forward to remove from the HVAC module case.
6. Disconnect the defroster vacuum actuator pushrod from the defroster valve lever and remove the defroster vacuum actuator.
Installation Procedure
1. Connect the defroster vacuum actuator push rod from the defrost valve lever.
2. Carefully rotate rearward and downward to align actuator slots with HVAC module case and push the defroster vacuum actuator toward the
HVAC module to secure the retaining tab.
3. Connect the vacuum lines to the defroster vacuum actuator.
4. Install the cross vehicle beam.