Intrigue V6-3.8L VIN K (1998)
5. Install the HVAC module seal (2) to the lower module case (1).
6. Install the evaporator core into the HVAC module lower case.
7. Align the guide (1) and attach the upper and lower HVAC module case.
Install the HVAC module upper screws.
Tighten
Tighten the HVAC module screws to 1.5 N.m(13 lb in).
8. Install the heater/defrost valve vacuum actuator to the HVAC module.
9. Install the air inlet housing.
Tighten
Tighten the air inlet housing screws to 1.5 N.m(13 lb in).