oldsmobile Workshop Repair Guides

Oldsmobile Workshop Service and Repair Manuals

Instrument Panel - Rattles/Fuse Block Loose|Page 2257 > < Electrical - Aftermarket Fuse Warning
Page 1
background image

Fuse Block: All Technical Service Bulletins
Instrument Panel - Rattles/Fuse Block Loose

File In Section: 8 - Chassis/Body Electrical 

Bulletin No.: 83-83-14

Date: August, 1998

Subject:
Instrument Panel Rattles and/or Fuse Block Loose (Reinforce Instrument Panel)

Models:

1998 Oldsmobile Intrigue

Condition

Some customers may comment that the instrument panel (I/P) rattles on the passenger side and/or the fuse block is loose in the opening. Technicians may
also experience difficult reinstallation of the fuse block.

Cause

The I/P fuse block opening may be cracked at the forward corner.

Correction

Install I/P reinforcement bracket (P/N 10412722), using the service procedure.

Procedure

1.

Remove I/P fuse block cover.

2.

Release fuse block retaining tabs and allow fuse block to lean back into I/P.

3.

Install fuse block reinforcement bracket by inserting bracket through upper access hole in I/P and route between fuse block and I/P structure (see
Figure 1).

Instrument Panel - Rattles/Fuse Block Loose|Page 2257 > < Electrical - Aftermarket Fuse Warning