Intrigue V6-3.8L VIN K (1998)
Cruise Control Switch: Service and Repair
Hazard Warning and Cruise Ctl Switch Replacement
REMOVAL PROCEDURE
Hazard Warning and Cruise CTL Switch Replacement: Removal Procedure
1. Remove the center air deflector.
2. Remove the radio control.
3. Squeeze to depress the retainers on the backside of the hazard warning and cruise control switch.
4. Pull to release the hazard warning and cruise control switch from the bezel in the instrument panel (IP) trim pad.
5. Disconnect the electrical connectors from the hazard warning and cruise control switch.
6. Remove the hazard warning and cruise control switch.
Hazard Warning and Cruise CTL Switch Replacement: Removal Procedure
7. Using a small flat-bladed tool, release the hazard warning and cruise control switch bezel retainers and remove the bezel from the IP trim pad, if
replacing.
INSTALLATION PROCEDURE