Intrigue V6-3.8L VIN K (1998)
Oil Level Sensor For ECM: Service and Repair
Engine Oil Level Switch Replacement
Removal Procedure
1. Raise the vehicle.
2. Drain the engine oil.
3. Disconnect the electrical connector from Engine Oil Level Switch.
4. Remove the Engine Oil Level Switch from the oil pan.
Installation Procedure
Notice: Refer to Fastener Notice in Cautions and Notices.
1. Install the Engine Oil Level Switch.
-
Torque the Engine Oil Level Switch to 22 N.m (16 lb ft).
2. Lower the vehicle.
3. Add the engine oil to the correct level.
4. Connect the negative battery cable.