Intrigue V6-3.8L VIN K (1998)
Accumulator: Service and Repair
REMOVAL PROCEDURE
1. Remove the oil pan.
2. Remove the filter.
3. Remove the accumulator bolts/screws (131).
4. Remove the manual 2-1 band servo cover bolts/screws (103).
5. Remove the accumulator (132).
6. Remove the manual 2-1 band servo cover (104).
7. Remove the manual 2-1 band servo (106-116).
8. Remove the manual 2-1 band servo cover gasket (105) from the case.
9. To disassemble, inspect and service the accumulator and manual 2-1 band servo, refer to Accumulator Assembly, 2-1 Band Servo Disassemble
and 2-1 Manual Band Assemble in Transmission Unit Repair.