Intrigue V6-3.8L VIN K (1998)
12. Ensure that the cable halves are engaged completely and engage the cable conduit lock clip.
IMPORTANT: The cable conduit lock clip MUST be COMPLETELY engaged.
13. In this example, the cable lock clip is NOT completely engaged because the clip is not flush with the cable casing.
14. Press the adjuster clip down completely.
15. Pull the shift cable adjuster toward the shift control in order to ensure that the cable halves are locked together.
16. Install the shift cable adjuster retainer.
17. Install the carpet back into position.
18. Install the console.
19. Install the throttle body air inlet duct.
