Ninety-Eight V6-252 4.1L VIN 4 4-BBL (1982)
Wiper Gear Box: Service and Repair
RECTANGULAR MOTOR
1.
Remove wiper arms and blades.
2.
Raise hood and remove cowl vent screen or grille.
3.
Disconnect wiring from motor.
4.
Loosen, do not remove, transmission drive link to motor crankarm attaching nuts and disconnect drive link from crankarm.
5.
Remove right and left transmission to body attaching screws and guide transmission and linkage out through cowl opening.
ROUND MOTOR
1.
Raise hood and remove cowl vent screen.
2.
On all except Toronado, remove right and left wiper arm and blade assemblies. On Toronado, remove arm and blade only from transmission to be
removed.
3.
Loosen, do not remove, attaching nuts securing transmission drive link to motor crankarm. On Toronado, if only the left transmission is to be
removed, it will not be necessary to loosen attaching nuts securing the right transmission drive link to the motor.
4.
Disconnect drive link from motor crankarm.
5.
On all except Toronado, remove right and left transmission to body attaching screws. On Toronado, remove the attaching screws securing only the
transmission to be removed.
6.
Remove transmission and linkage by guiding it through opening.
