Ninety-Eight V6-3.8L VIN K (1995)
2. Drain engine coolant, then remove accessory drive belt, Fig. 25.
3. Remove alternator and heater hoses.
4. Remove tensioner attaching bolts, then the tensioner.
Install or Connect
1. Tensioner.
2. Tensioner bolts.
Tighten
^
Bolts to 50 Nm (33 lb. ft.).
3. Heater hoses.
4. Alternator.
5. Accessory drive belt. Refer to Fig. 25..
6. Refill cooling system.
7. Negative battery cable.