Ninety-Eight V6-3.8L VIN K (1995)
4. Programmer, Refer to Programmer Service and Repair. See: Control Module HVAC/Service and Repair
^
Adjust Driver temperature valve link rod after installation, Refer to Programmer / Adjustments / Temperature Valve Link Adjustment / RPO
(CJ2). See: Control Module HVAC/Adjustments
(Actuator) Passenger Air Mix Valve
Programmer Assembly
REMOVE OR DISCONNECT
^
Disable Supplemental Inflatable Restraint (SIR) system, Refer to Air Bags and Seat Belts / Air Bags (Supplemental Restraint Systems). See:
Restraint Systems/Air Bag Systems
1. Instrument Panel (I/P) compartment insert by pulling rearward and disengaging stops.
2. Temperature valve link rod from plastic retainer on temperature valve.
3. Electrical connector.
4. Passenger air mix valve actuator screws and actuator.
INSTALL OR CONNECT
1. Screws after positioning passenger air mix valve actuator.
^
Tighten screws to 1.4 Nm (12 lb. in.).