oldsmobile Workshop Repair Guides

Oldsmobile Workshop Service and Repair Manuals

Recall - Modular Rear Seat Latches|Page 4812 > < Recall - Modular Rear Seat Latches|Page 4806
Page 1
background image

Technical Service Bulletin # 90C01109

Date: 890901

Recall - Modular Rear Seat Latches

Subject:

MODULAR REAR SEAT LATCHES

Models/Years: 1990 SILHOUETTE
Number.

90-C-01

Date:

Sept. 1989

Section:

10-9

CONDITION

General Motors has determined that some 1990 Oldsmobile Silhouette APV model vehicles may fail conform to Federal Motor Vehicle Safety Standard
(FMVSS) 207, "Anchorage & Seats". The rear modular seat frame hold down hooks may not meet the required pull force at the rear seat anchorage.

To correct this condition, dealers are to replace the two rear hold down hooks and pivot rivets with (heat treated) hold down hooks, bolts, bushings, and
nuts on each rear modular seat (up to 5 rear seats per involved unit).

Vehicles Involved, Dealer Action & Service Procedure Information

VEHICLES INVOLVED

Involved are certain 1990 Oldsmobile Silhouette model vehicles with the following SPECIFIC Vehicle Identification Numbers:

Figure 3

Vehicles with VIN's failing between the listed VIN's were repaired at the factory prior to shipment. Repaired latches are identified with green paint, or
green tape, or a green dot sticker in the general location shown in Figure 3 of the SERVICE PROCEDURE.

Recall - Modular Rear Seat Latches|Page 4812 > < Recall - Modular Rear Seat Latches|Page 4806