Silhouette V6-191 3.1L (1990)
Wheel Bearing: Service and Repair
Front
FRONT WHEEL BEARINGS AND/OR HUB
Fig. 11 Removing & Installing Hub Nut
Fig. 12 Separating Hub & Drive Axle
Fig. 13 Hub & Bearing Assembly
1.
Raise and support vehicle.
2.
Support rear axle under front side of spring seat.
3.
If removing right side bushing, disconnect parking brake cable from hook guide.
4.
Disconnect dual parking brake cables from bracket attachment and pull out of the way.
5.
Insert a drift punch through the brake caliper and rotor as shown in Fig. 11.