Silhouette FWD V6-3.4L VIN E (2004)
Ignition Coil: Service and Repair
IGNITION COIL(S) REPLACEMENT
REMOVAL PROCEDURE
1. Disconnect the spark plug wires. Note the position from which the wires are removed.
2. Remove the 2 screws securing the ignition coil to the ignition control module.
3. Remove the ignition coil.
INSTALLATION PROCEDURE
1. Install the ignition coil.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the 2 attaching screws.
Tighten
Tighten the screws to 4.5 N.m (40 lb in).
3. Connect the spark plug wires.