Silhouette FWD V6-3.4L VIN E (2004)
Child Seat Tether Attachment: Service and Repair
Child Restraint Belt Tether Location (Outboard-Third Row)
CHILD RESTRAINT BELT TETHER LOCATION (OUTBOARD-THIRD ROW SEAT)
REMOVAL PROCEDURE
IMPORTANT: The child seat tether attaches or anchors in two different ways. The tether strap attaches to the third row outboard lower seat belt
anchor bracket or the third row seat rise depending on the seat configurations. Use the child seat tether strap only in the second row.
1. Slide the rear seat belt sleeve to the upward position in order to expose the tether strap anchor.
2. Remove the tether strap spring clip from the seat belt anchor plate.
3. Remove the tether strap from underneath the head restraint if equipped.
4. Remove the tether strap from the vehicle.
INSTALLATION PROCEDURE