Silhouette FWD V6-3.4L VIN E (2004)
4. Install the seat belt retractor (2) to the B-pillar (1).
5. Use the J 29843-9 in order to install the retractor bolt (3).
Tighten
Tighten the bolt to 43 N.m (32 lb ft).
6. Install the plastic escutcheon (3) into the B-pillar trim where the retractor side seat belt webbing exits.
7. Install the center pillar lower trim panels.
8. Install the center pillar upper trim panels
9. Install the nut securing the upper guide loop anchor (2) to the B-pillar.
Tighten
Tighten the anchor nut to 29 N.m (21 lb ft).
10. Install the shoulder belt guide cover to the adjuster bracket (2).
