Silhouette FWD V6-3.4L VIN E (2004)
2. Install the rear wiper motor module cover.
3. Connect the rear wiper motor module electrical connector.
4. Install the liftgate trim panel.
5. Inspect the rear wiper for proper operation.
Wiper Motor Replacement
WIPER MOTOR REPLACEMENT
REMOVAL PROCEDURE
1. Remove the wiper motor crank arm.
2. Remove the front washer hose from around the wiper motor and position aside.
3. Remove the wiper motor screws.
4. Remove the wiper motor from the wiper drive system module.
5. Disconnect the wiper motor electrical connector.
6. Remove the wiper motor from the vehicle.
INSTALLATION PROCEDURE