Toronado V6-231 3.8L (1986)
7.
Inspect spring insulators and retainers and replace as needed.
8.
Install center and upper outboard insulators in crossmember and torque bolts to 21 ft. lbs. Ensure arrows on upper outboard insulators point
toward centerline of vehicle.
9.
Position spring in crossmember, ensuring outboard and center insulator bands are centered on spring insulators.
10.
Install lower insulator and retainer on side opposite disassembled portion of suspension, torque retaining bolts to 21 ft. lbs, then place suitable
stand under free end of spring.
11.
Lower vehicle, allowing weight to load spring and deflect free end of spring into position.
12.
Install lower insulator and retainer, and torque bolts to 21 ft. lbs.
13.
Raise vehicle and remove stand.
14.
Reverse remaining procedure to complete installation.