Toronado V6-231 3.8L (1986)
plate for a missing or partial governor passage hole (25) as shown in Figure 2. A partial hole can be drilled out using a #77 drill bit to meet the hole size
requirement of.46mm(.018"). If the hole is missing,use the spacer plate gasket and control valve body as a guide to locate and drill the hole, or replace
the spacer plate.
Intermittent Harsh Part Throttle 3-2 Shift:
1985 - 1/2 - All Models Except 2.8L Or 3.OL Engines
1986 - All Models Except 2.8L Or 3.OL Engines With Transaxles Built
Prior To July 21, 1986 (Julian Date 202)
An intermittent harsh 3-2 shift may be caused by a broken 3-2 line control retainer (435) (refer to Figure 3). Remove the transaxle side cover to access
the 3-2 line control valve and, if necessary, replace a broken retainer with P/N 8658678. Also ensure the 3-2 line control valve moves freely in its bore.
Harsh 3-2 Shift **High Altitude Only**